01
Existing lawn removal
Failed turf and applicable surface material are removed so the actual soil and elevations can be evaluated and prepared.
Kingwood, TX and Nearby Areas
Sod Installation, Grading & Irrigation in Kingwood, TX
Replace the failed lawn from the ground up.
A thin, uneven or muddy lawn can make the whole property feel unfinished. Simply covering it with new grass may bring the same problem back. PLS Landscaping rebuilds existing residential lawns through old-turf removal, finish grading, soil preparation, irrigation review and professional sod installation. The goal is a cleaner, more even lawn your family can enjoy and your new grass has a better opportunity to establish.
★★★★★READ GOOGLE REVIEWSServing Greater Houston Since 2011
Existing Lawn Reconstruction
Onsite Project Evaluation
Why the old lawn keeps struggling
New sod cannot correct the condition underneath it
Bare soil, standing water and uneven mowing surfaces often point to more than old grass. The installation plan should consider elevation, drainage, soil, sunlight and irrigation before the first pallet arrives.
01
Low or uneven lawn areas
Settlement and irregular grade can hold water, create soft areas and leave visible dips after sod is installed.
02
Compacted surface soil
Dense soil and construction disturbance may limit rooting and make it harder for water to move into the prepared lawn layer.
03
Inconsistent sprinkler coverage
Misaligned heads, damaged components and changed lawn boundaries can leave some sod too dry while other areas stay wet.
04
Grass selected without enough sunlight
Heavy tree cover can limit turf performance. Grass selection and expectations should reflect the actual light reaching the lawn.
Complete lawn replacement
One coordinated scope from removal to first watering
Each property needs a measured plan. We coordinate the applicable work so the prepared surface, irrigation and finished sod elevation support one another.
02
Finish grading
Localized high and low areas are corrected to improve the lawn surface and connect it cleanly with nearby hardscape and beds.
03
Soil preparation
Applicable soil amendments or selected planting soil are spread and refined to create a smoother rooting surface for the new sod.
04
Irrigation adjustments
Sprinkler heads and visible coverage concerns are reviewed. Approved repairs or layout changes are completed before sod placement.
05
Sod installation
Fresh sod is fitted tightly, cut around site features and rolled or settled as appropriate over the prepared finish grade.
06
Initial care review
We review the first watering period and practical access considerations so the household understands the lawn-establishment phase.
Grass selected for the property
Sunlight, family use and maintenance matter
The right turf choice depends on the yard rather than a single favorite variety. We discuss the available options after reviewing light, irrigation and the way your household plans to use the lawn.
St. Augustine
A common residential choice that can provide a broad-bladed lawn. Site-specific sunlight, watering and care still determine establishment and long-term performance.
Zoysia
Selected by some homeowners for its dense appearance and texture. Variety, sunlight, irrigation and maintenance expectations should be reviewed before installation.
Bermuda
Often considered for sunny, active areas. It generally needs strong sunlight and should not be selected for heavily shaded sections without realistic expectations.
Living material notice: Sod is a perishable living material. Establishment depends on sunlight, weather, soil conditions, irrigation, watering and care after installation. Drainage or severe shade concerns may require a separate solution before lawn replacement.
PLS project work
See the lawn reconstruction process
These photographs show four different parts of a residential lawn project: clearing the failed surface, preparing soil, coordinating irrigation and completing the new lawn.
Construction sequence
Prepare every layer before installing the lawn
The exact scope varies, but the new sod should be the final surface rather than the first attempt to hide an unresolved problem.
01
Evaluate
Review sunlight, grade, soil, lawn boundaries, access, drainage symptoms and irrigation coverage.
02
Remove
Clear failed turf and applicable surface material to expose the area that needs reconstruction.
03
Correct
Complete approved irrigation work and localized elevation or soil corrections while the yard is open.
04
Prepare
Refine the soil surface, establish finished transitions and prepare for delivery and installation.
05
Install
Place the selected sod, inspect visible transitions and review initial watering and access.
Bring everyday life back outside
A lawn should invite your family into the yard
A reconstructed lawn can replace dusty bare soil, uneven footing and recurring muddy tracks with a cleaner outdoor surface. It gives children room to play, creates a more pleasant area for pets and makes the view from the patio feel cared for again. The best result is not only greener. It is a yard that feels useful, comfortable and ready for everyday family life.
A cleaner route from the patio to the lawn
A smoother surface for play and everyday use
Less exposed soil tracked indoors by pets
A finished setting for beds and outdoor living areas
Planning your lawn project
Sod installation questions
Can you remove my existing lawn before installing sod?
Yes. Existing turf and applicable surface material can be removed as part of the project. This exposes the soil and makes it possible to address the prepared lawn surface before new sod is installed.
Does every sod project need grading?
Not every lawn needs major grade correction. Many replacement projects benefit from finish grading or localized correction to smooth the surface and improve transitions. Substantial elevation or drainage problems may require a separate construction scope.
Will you check the irrigation before installing sod?
Visible heads, lawn boundaries and coverage concerns can be reviewed. Approved repairs, head adjustments or system modifications should be completed before sod placement so the new lawn can be watered more consistently.
Which grass is best for a shaded Kingwood yard?
The answer depends on the amount and duration of sunlight, tree canopy, irrigation and use. No turf performs well without sufficient light. We discuss realistic options after evaluating the property.
How soon can children and pets use the new lawn?
Traffic should be limited while the sod begins rooting into the prepared soil. Weather, grass type and establishment conditions affect timing, so access guidance is reviewed for the specific installation.
Do you serve neighborhoods near Kingwood?
Yes. PLS Landscaping serves Kingwood and nearby communities in northeast Houston. Project availability depends on the scope, access and location.
Schedule an onsite estimate
Start with the lawn condition, not only the grass
We will review the existing surface, elevations, sunlight, irrigation and the way your household wants to use the yard before defining the recommended lawn-replacement scope.
