Reshape the Yard.
Control the Elevations.
Residential skid-steer grading for low areas, uneven terrain, poor surface flow, soil installation, slope correction, and site preparation in The Woodlands and nearby communities. Machine grading is coordinated with laser elevation checks and detailed hand finishing.
The objective is not to move dirt. It is to establish the required grade.
Larger elevation corrections require controlled earthwork.
A skid steer can efficiently remove surface material, cut high areas, distribute soil, blend slopes, and prepare larger residential areas. The machine is a tool within the grading plan, not a substitute for elevation measurements or finish work.
Recurring Depressions
Settled sections and broad low areas hold water, remain muddy, and create an uneven finished lawn.
High Areas and Berms
Raised soil, construction disturbance, and misplaced fill can block the natural route that runoff needs to follow.
Insufficient Finished Elevation
Some yards require suitable soil placement and blending to raise low surfaces while maintaining foundation and hardscape clearances.
Unprepared Project Areas
Sod, drainage, concrete, pavers, gravel, and retaining construction require an intentional starting elevation and prepared subgrade.
Use the machine for production. Use elevations for control.
Efficient machine work must still respect drainage direction, foundation exposure, fence and gate clearances, tree roots, irrigation components, utilities, and the thickness of the material that will be installed afterward.
Surface Removal
Remove failed lawn, roots, loose organic material, unsuitable soil, and construction debris that cannot remain beneath the finished surface.
Cut and Fill
Excavate high areas, place suitable material in low sections, and redistribute soil according to the proposed grade.
Soil Placement
Distribute select fill or topsoil in controlled lifts where additional elevation or a suitable finish layer is required.
Slope Formation
Blend corrected elevations into surrounding grades and direct surface water toward the intended swale, inlet, or discharge route.
Compaction
Compact placed material where required for stability and the intended finished use, while avoiding inappropriate overcompaction in planting or turf-root zones.
Finish Grading
Verify elevations and complete detailed hand grading so the final surface is ready for sod, seed, gravel, drainage, or construction.
The final use determines the grading specification.
A lawn, drainage system, concrete slab, paver base, and gravel area do not use the same finished elevation. The grading plan must reserve space for the complete material assembly.
Explain the Planned Project →Grading for Sod
Shape the yard, provide the required soil layer, maintain clearances, and reserve elevation for the sod thickness.
Grading for Drainage
Coordinate low points, surface-flow direction, drain-inlet elevations, swales, pipe depth, and the final discharge route.
Grading for Concrete or Pavers
Excavate and prepare the subgrade to allow for base material, reinforcement, finished thickness, transitions, and drainage slope.
Whole-Yard Correction
Reshape broader areas using cut-and-fill work, imported soil, compaction, slope blending, and detailed surface preparation.
Measured, reshaped, verified, and prepared.
Machine production and finish control are completed in sequence so the project does not stop at a rough, tracked surface.
Evaluate Access and Grade
Review gates, utilities, trees, structures, drainage, soil, clearances, and the intended finished use.
Establish Elevations
Use laser readings to identify cut areas, fill areas, drainage direction, and proposed surface elevations.
Complete Earthwork
Remove unsuitable material, cut high areas, place soil, compact as required, and blend corrected slopes.
Check the Surface
Recheck critical elevations, low points, foundation clearance, transitions, and the planned surface-flow path.
Hand Grade and Restore
Rake and refine the surface, remove debris, and prepare the area for the final lawn or construction phase.
Not every backyard can support skid-steer access.
Before planning machine work, we review gate width, side-yard clearance, fence openings, overhead obstacles, underground utilities, septic components, irrigation, tree roots, soil bearing conditions, and the route used to enter and exit the work area.
Site-readiness review
Complete the systems affected by the new grade.
A corrected surface may require drainage infrastructure, lawn restoration, irrigation adjustments, or a coordinated landscape-construction phase.
Review the condition before work and the finished result.
Recommended by Houston-area homeowners.
“My backyard looks beautiful. Noe and his team were very professional from start to finish. They took the necessary time to get the job done right. I would highly recommend them.”
“Noe and his team were amazing. Prompt, professional, and perfectionists. They went the extra mile to make sure every sprinkler head and piece of sod was positioned just right.”
“PLS has consistently done great work for us on drainage work, moving sprinklers, plant beds, and artificial turf. There is real care behind the work they do, and it shows.”
Residential grading across North Houston.
Serving The Woodlands, Spring, Shenandoah, Oak Ridge North, Magnolia, Tomball, Conroe, Klein, and nearby communities. Contact us with the project ZIP code and access information to confirm availability.
Can a skid steer fit through my side yard?
Will grading alone solve standing water?
What type of soil is used to raise low areas?
Can grading damage sprinkler components?
Does machine grading include hand grading?
How is skid-steer grading priced?
Let us measure the yard before moving the soil.
An on-site evaluation allows us to inspect access, elevations, low areas, water flow, soil conditions, foundation clearance, utilities, irrigation, and the final installation planned for the corrected surface.
