Paver patios
Defined areas for dining, seating and everyday family use, constructed around excavation depth, compacted aggregate, bedding, pattern, perimeter restraint and finished pitch.
Houston and Nearby Cities
Residential hardscape construction
Paver Patios, Walkways & Outdoor Living Areas in Houston, TX
A patio should feel solid under furniture. A walkway should remain comfortable to cross after rain. Gravel and decomposed granite should stay contained instead of migrating into the lawn. PLS Landscaping builds these connected surfaces by planning excavation, compacted base, edge restraint, finished elevations and drainage before the final material is installed.
Plan the surface and the water together
We review access, elevations, drainage paths, irrigation conflicts and intended use during an onsite estimate.
Serving Houston Since 2011Residential ConstructionOnsite Planning
When the yard is difficult to use
Mud, movement and trapped water take the comfort out of an outdoor area
Homeowners often begin with a simple goal: a place where the family can sit, walk, cook or gather without stepping through wet grass or unstable stone. The frustration usually comes from conditions below the finished material, including soft subgrade, insufficient base, weak perimeter restraint, incorrect elevation or runoff with nowhere responsible to go.
Loose or rocking paversMovement commonly points to base, compaction, bedding or edge-restraint problems.
Gravel spreading into lawnUndefined edges allow stone to migrate and make the boundary difficult to maintain.
Puddles beside the patioThe new surface may interrupt existing flow or sit below surrounding finished grade.
No dependable gathering areaFurniture sinks, routes feel disconnected and outdoor time becomes more work than enjoyment.
One connected construction plan
Materials perform better when the layers and transitions are built correctly
Walkways and connections
Stable routes between gates, driveways, patios, pools and back doors, with width, step rhythm and transitions planned for comfortable movement.
DG and decorative gravel
Decomposed granite or selected gravel can form patios, joints and low-traffic surfaces when the subgrade, separation, base, compaction and containment match the intended use.
Landscape borders
Stone, masonry, paver or steel edging separates aggregate, planting and lawn while protecting clean lines and accommodating planned grade changes.
Hardscape drainage
Surface pitch, collection points, channel drains or subsurface conveyance may be coordinated where paved areas alter existing runoff or create enclosed low points.
Outdoor living areas
Patio footprints can be coordinated with grills, furniture, shade structures, planting, lighting pathways and lawn so the finished space supports how the household actually uses it.
What is below the finish
The visible material is only the final layer
A successful assembly begins with removal to the required depth and evaluation of the exposed subgrade. Aggregate base is installed in appropriate lifts and compacted. Bedding or setting material, pavers, joints and edge restraint complete the surface. Actual layer depth and material selection depend on soil, loads, drainage and manufacturer requirements.
Elevation decisions protect the house and the finished work
The patio cannot be planned in isolation. Door thresholds, foundation exposure, weep details, adjacent lawn, downspouts, fence gates and neighboring grades all affect the finished elevation. Water should be directed away from structures toward an appropriate collection or discharge route without simply transferring the problem to another part of the property.
Important: permeable-looking joints do not automatically solve drainage. Base materials, soil conditions, surface pitch and outlet capacity still matter.
Construction and completed surfaces
Project details that show how outdoor areas connect
These photographs show different residential construction conditions, including open access, defined edges, large-format walking surfaces and finished transitions.
Construction sequence
A deliberate build from site evaluation to final review
The exact sequence changes with the property, but underground conflicts and elevation work are addressed before completed surfaces are protected.
01
Evaluate
Review access, soil, elevations, runoff, irrigation, utilities and use of the proposed area.
02
Lay out
Confirm dimensions, walking routes, furniture zones, border lines and finished elevations.
03
Excavate
Remove existing material to the required depth and expose the subgrade for preparation.
04
Build the base
Install drainage or sleeves where applicable, place aggregate in lifts and compact the assembly.
05
Install finishes
Set pavers, construct borders, install DG or gravel and complete edge restraint and joints.
06
Review
Inspect transitions, clean the work area and test applicable drainage components.
Continue planning the property
Related residential construction services
Front Yard RenovationSod, irrigation and planting construction
Landscape Restoration After Pool ConstructionGrading, irrigation, sod and turf restoration
New Home LandscapingSite preparation, irrigation, sod, trees and borders
Sod, Lawn Leveling and IrrigationLiving-surface restoration around completed construction
Houston service area
Patio and walkway construction for Houston homes
PLS Landscaping provides onsite estimates in Houston and nearby communities. Availability depends on project scope, access and location.
What is the difference between a paver patio and a DG patio?
Pavers create individual solid units over a prepared base and bedding layer. Decomposed granite creates a compacted aggregate surface. Cost, texture, furniture stability, maintenance expectations, drainage and intended use all influence the appropriate assembly.
Can drainage be installed with the patio project?
Yes, when site conditions require it. Drainage should be planned before the base and surface are completed so collection points, pipe routes and discharge can be coordinated with finished elevations.
Why is edge restraint important?
Edge restraint helps contain pavers or aggregate, supports the perimeter and preserves alignment. The correct detail depends on the selected surface, adjacent material and expected loads.
Can an existing patio be enlarged?
Often, but the existing surface, elevation, base condition, drainage and material availability must be evaluated. A new addition should connect without creating a weak joint or a low area that traps water.
How is project pricing determined?
Pricing depends on measured area, demolition, excavation depth, disposal, access, base materials, paver or aggregate selection, borders, drainage requirements, equipment and restoration. An onsite estimate allows those conditions to be reviewed directly.
Schedule an onsite estimate
Create a stable place for everyday life outside
We will review the proposed footprint, access, existing grade, drainage, borders and materials so the construction plan supports the way your family wants to use the space.
Call for an Onsite Estimate
Text to Schedule an Evaluation
Request Free EstimateOpens our short contact form
