Dry strips beside wet pavement
Incorrect head position, arc or spacing can leave part of the lawn dry while water reaches sidewalks, fences or patios.
Cinco Ranch, TX and Nearby Areas
Rebuild the watering plan around the finished landscape
Irrigation Renovation & Landscape Upgrade in Cinco Ranch, TX
An irrigation system installed for the original yard may no longer fit enlarged beds, new trees, replaced sod, patios or revised borders. Heads can become buried or blocked, lawn zones may spray planting areas and old schedules may apply the same water to surfaces with different needs. PLS Landscaping evaluates the existing controller, valves, zones, lines, heads and visible coverage against the proposed landscape reconstruction. Applicable underground modifications are completed before soil preparation, planting and sod installation. Lawn areas can receive properly positioned spray or rotor coverage, while beds may use drip irrigation where appropriate. Coordinating these systems first protects the completed work and gives the family a landscape that is easier to use, monitor and establish.
Serving Houston Since 2011Residential IrrigationLandscape Installation
When the original system no longer matches the property
Landscape reconstruction exposes coverage conflicts quickly
Changing the lawn footprint, bed dimensions or hardscape affects where water must be delivered. Correcting system conflicts before installation reduces overspray, dry areas and avoidable excavation through completed work.
Heads inside new beds or borders
A changed landscape layout can bury, block or misdirect heads that were placed for the previous lawn footprint.
Shrubs and turf share one schedule
Different root zones and application methods can make a single watering schedule inefficient for both lawn and planting beds.
Leaks or weak operating pressure
Broken lines, damaged heads, valve problems or too many devices operating together can reduce effective coverage.
Coordinated construction scope
Upgrade the watering system before closing the ground
01
Irrigation evaluation and upgrades
Review controller operation, valves, visible leaks, head placement, spray patterns and proposed zone changes. Work may include new heads, rotors, drip tubing, valves, wiring or controller updates as applicable.
02
Lawn reconstruction and soil preparation
Remove failed turf, address applicable surface irregularities, prepare the soil and position heads around the revised lawn limits before fresh sod is fitted.
03
Beds, borders and planting reconstruction
Redefine beds, prepare planting soil, install selected trees and shrubs, complete borders and coordinate drip or targeted irrigation within the new layout.
System-design principle: irrigation zones should group areas with compatible watering needs where practical. A shaded planting bed and a sunny lawn often require different application methods and schedules.
Lawn coverage
Spray heads and rotors need compatible spacing
Head type, pressure, nozzle, arc and spacing affect how evenly water reaches the lawn. Overspray should be reduced around pavement, walls and planting beds while maintaining useful coverage within the sod area.
Planting beds
Drip irrigation delivers water near root zones
Drip tubing and emitters can support trees, shrubs and planting beds when filtration, pressure regulation, layout, inspection access and scheduling are appropriate for the zone.
Installation sequence
Test and modify irrigation before installing living material
Fresh sod and planting are perishable. Underground repairs and coverage adjustments belong ahead of final placement.
1. Evaluate the current system
Operate zones, review visible components, map conflicts and compare coverage with the proposed lawn and bed layout.
2. Complete underground changes
Modify applicable lines, valves, wiring, heads and drip routes while the soil remains open.
3. Prepare soil and planting areas
Establish lawn and bed limits, prepare soil and confirm finished elevations around heads, borders and pavement.
4. Install sod and plants
Place fresh sod, trees and shrubs, complete mulch or surface material, and protect visible irrigation components.
5. Test coverage and begin establishment
Operate applicable zones, make final visible adjustments and review the initial watering requirements.
Irrigation and landscape components
Coverage, planting and finished lawn must work together
These photographs show sprinkler adjustment, active lawn coverage and completed landscape conditions supported by coordinated watering.
New sod establishment
Fresh grass needs prompt, consistent watering
Sod is perishable living material. Watering must begin promptly and adapt to weather, soil, rooting and irrigation performance without creating prolonged saturation or runoff.
New plant establishment
Root balls and surrounding soil must be monitored
New trees and shrubs need watering based on plant size, weather, drainage and soil moisture. Automatic irrigation supports care but does not replace inspection during establishment.
Related construction services
Plan the systems connected to the new landscape
Project questions
Before irrigation, sod and planting work begins
Can the existing irrigation system be modified for a new landscape?
Often, yes. The usable controller, valves, zones, lines and heads must be evaluated against the new layout, pressure and coverage requirements before the modification scope is defined.
Should planting beds use spray heads or drip irrigation?
Drip irrigation is often appropriate for targeted root-zone watering, but the final method depends on plant material, bed layout, pressure, filtration, soil and system design.
Will irrigation be tested before sod is installed?
Applicable zones and visible coverage should be tested before final placement so necessary underground or head-location changes do not disturb new sod.
Can lawn and planting areas operate on the same zone?
They sometimes can, but different application methods and watering needs often make separate zones preferable where the existing system and project scope allow.
Does automatic irrigation guarantee plant or sod establishment?
No. Weather, soil, drainage, coverage, plant condition and homeowner monitoring all affect establishment. The system must be observed and adjusted as conditions change.
What determines the project price?
Pricing depends on system condition, controller and valve needs, line and head changes, drip quantities, lawn and bed areas, soil preparation, sod selection, plant material, access and restoration.
Request an onsite evaluation
Give the new lawn and planting a watering system planned for the finished layout
PLS Landscaping will review the existing irrigation system, visible coverage, proposed lawn and bed limits, soil and planting needs before defining the construction scope.
