Outdoor living
Concrete patios and extensions
Create or enlarge a seating and cooking surface with planned dimensions, house transitions, runoff direction and connections to the yard.
Spring, Texas and nearby areas
Concrete Patios, Driveways, Walkways and Small Pads in Spring, TX
Cracked concrete, low slabs and muddy access routes affect more than appearance. They can interrupt drainage, create uncomfortable transitions and make everyday use of the property frustrating. PLS Landscaping plans residential concrete around demolition, access, subgrade condition, finished elevation, water movement and restoration.
Conditions worth correcting
Concrete problems often begin at transitions, edges and drainage paths
Replacing the visible slab without reviewing the surrounding grade can reproduce the same conflict. We evaluate how the proposed concrete meets the house, street, garage, lawn, gates, downspouts and existing hardscape before setting the finished elevation.
01
Cracked or settled surfaces
Movement, weak base conditions, roots and age can leave driveways, patios or walkways uneven.
02
Water held against a slab
Low edges, poor cross-slope or blocked discharge can leave water trapped beside concrete.
03
Muddy daily access
Routes to gates, equipment, trash storage and patios may need a durable walking surface.
04
Unusable outdoor space
An undersized or poorly connected patio can limit seating, cooking and circulation.
Residential concrete construction
Concrete sized and positioned for how the property is used
The proposed use determines layout, access, edge conditions and construction requirements. Every scope is evaluated onsite before materials and quantities are defined.
Vehicle access
Concrete driveways
Remove and replace selected driveway areas or construct new access where layout, municipal conditions, approach and drainage can be addressed.
Pedestrian routes
Walkways and side paths
Connect doors, gates, driveways and backyards with a defined route that accounts for walking width, steps, turns and adjacent grade.
Equipment support
Small concrete pads
Build properly located pads for selected residential equipment, storage or utility uses after confirming required dimensions and applicable clearances.
Removal
Demolition and disposal
Break, remove and haul selected failed concrete while protecting improvements that remain and maintaining practical equipment access.
Coordination
Drainage and landscape restoration
Coordinate applicable drains, downspouts, irrigation adjustments, soil grading and restoration before final lawn and planting surfaces are installed.
Before concrete arrives
Preparation determines whether the finished slab fits the site
Thickness and reinforcement are not universal specifications. They depend on the intended use, soil and project design. We define the applicable assembly after evaluating site conditions and access.
Subgrade and base
Remove unsuitable material, establish required depth and prepare support below the slab.
Forms, elevation and slope
Set boundaries and finished height around doors, garage floors, street connection, lawns and drainage paths.
Reinforcement and joints
Select reinforcement and joint layout according to slab function, dimensions and project conditions.
Placement and curing protection
Coordinate placement, finishing, weather conditions, access restrictions and initial protection of the new surface.
Concrete work in the field
Demolition, preparation and placement are part of the finished result
These separate project photographs show the stages that homeowners do not always see in a finished concrete surface.
Construction sequence
A practical path from site evaluation to restoration
01
Evaluate and measure
Review use, access, utilities, elevations, drainage, demolition and adjoining surfaces.
02
Remove and excavate
Remove selected concrete or soil and expose the area needed for subgrade preparation.
03
Form and prepare
Establish boundaries, base, elevation, slope, reinforcement and joint plan as applicable.
04
Place and restore
Place and finish concrete, protect initial curing and restore affected lawn or landscape areas.
Related Spring services
Coordinate the work surrounding new concrete
Concrete often affects drainage, grade, irrigation, turf and landscape restoration. Review these separate Spring construction services when the project extends beyond the slab.
Water managementBackyard Drainage SolutionsCollection, pipe conveyance and discharge planning.
Surface restorationArtificial Turf InstallationPrepared-base turf adjoining selected hardscape areas.
Complete yard workLandscape ConstructionPlanting, borders, lawn and connected outdoor construction.
Elevation correctionFront and Backyard GradingSurface shaping and restoration around finished work.
Spring-area concrete construction
Residential projects in Spring and nearby north Houston communities
PLS Landscaping provides onsite estimates in Spring and nearby areas, including Klein, Champions, Gleannloch Farms, Augusta Pines and parts of north Houston. Availability depends on project scope, access and location.
Concrete project questions
Before demolition or placement begins
Can you replace an existing cracked patio or driveway?
Yes, when the project scope and access are suitable. The existing concrete is evaluated for demolition, disposal, adjoining structures, subgrade conditions and replacement elevation.
How thick should residential concrete be?
There is no single answer for every slab. Intended use, anticipated load, soil, base, reinforcement, local requirements and project design determine the applicable assembly.
How is drainage handled around a new patio or walkway?
Finished elevation and slope are planned around doors, foundations, existing drains and the available runoff route. Channel drains, catch basins or pipe work may be included when surface slope alone is not sufficient.
Can concrete be poured directly over soil?
The site must first be evaluated and prepared. Organic material, unsuitable soil, required excavation, compaction and base conditions are addressed before forms and concrete placement.
Do you restore the lawn after concrete construction?
Restoration can be included in the defined scope. Access routes, grade repair, soil and sod quantities are identified during the onsite evaluation rather than assumed after construction.
How is concrete project pricing determined?
Pricing is based on measured area, demolition, access, excavation, disposal, base requirements, forms, reinforcement, concrete volume, finish, drainage coordination and restoration. An onsite estimate is required to define the construction scope.
Plan the slab around the property
Schedule an onsite evaluation for your concrete project
PLS Landscaping will review the proposed use, access, elevations, drainage and surrounding restoration before defining the construction scope for your Spring-area property.
